Skirting the addition is not the same as skirting the issue. I’m using pre-painted roofing, cutting it with a Dual Saw and burying it 5 to 7 inches deep in the ground.
Some things that’s helped me do this project:
2×4 strongtie metal ledge hangers, 1 per three feet
Pressure treated 2×4 “stud”, mounted widthwise, 2 ” above ground level
Roofing screws with rubber washers, 1 1/2″ and 2″
Screened loam, John Deere tractor
sharp square loam spade, rake
8p short galvanized nails, palm nailer, compressor, hose
Installing Skirting
tape, level, tri-square, sheet-stock square, pencil, marker
hammer, punch, drill, 1/4 ” hex driver bit
Advertisement
bobhowe said,
June 28, 2011 at 12:55 pm
Looking good! I like your traditional Maine siding!